The Hakko FA-430 fume extraction system is designed for use in soldering and welding applications. It features a compact size, three-stage filtration, and adjustable airflow.
One of the main advantages of the Hakko FA-430 is its compact size. This allows it to fit easily on a workbench or in a smaller workspace. The three-stage filtration system effectively captures harmful fumes and particulates, providing a safer work environment.
The adjustable airflow allows for customization according to the needs of the task at hand. Another benefit is the easy maintenance and replacement of filters, ensuring that the unit continues to function optimally.
If you’re an artist, jeweler, or just someone who likes to do crafts, then you know the importance of having a good fume extraction system. Without one, you run the risk of inhaling dangerous fumes and chemicals.
Today we’ll be taking a look at the Hakko FA-430 Fume Extraction System. This is a popular choice among artists and crafters because it is affordable and easy to use. Let’s take a closer look at this system and see if it’s right for you!
Specifications
- Dimensions are 13.0 x 14.4 x 13.5 inches;
- Weight (with filters) is approximately 16.5 pounds;
- The power consumption is 110 W;
- The noise level is 50 dB;
- The maximum suction capacity with a single duct is 4.1 m3/min. (145 cfm);
- The filtering efficiency is 99.97% 0.3 µm;
- The static pressure is 1,500 Pa;
- Noise level is measured at a distance of 1 m from the face of the unit in an anechoic room;
- 3-airflow adjustment modes: high, medium, low;
Design
An industrial use a 3-stage filtration system for the manufacturing industry.
Its easy-to-use interface and powerful suction make setup quick and efficient. This dual port, multi-layered filtration unit is the perfect companion to any soldering station workbench backed by the quality and reliability of Hakko.
The Hakko FA-430 absorbs smoke and passes it through its multi-layered filtration system pumping out clean air for you to breathe. This filtration system has a 98% efficiency rate at capturing particles as small as 0.3 microns in size. Its flexible duct makes placement convenient for hard-to-reach areas and its simplistic designed interface makes it easy to operate.
With dual ports for 2 operators, and a 3-layer filtration system with air purification vents, the HAKKO FA-430 keeps you safe and your air clean to breathe. The HAKKO FA-430 runs such a powerful filtration system that it has greater than a 98% efficiency rating at capturing particles as small as 0.3 microns, providing you with a safe environment in the workplace.
Performance
The ducting is freestanding and adjustable with either one or two can be installed, the FA430 also utilizes a 2 stage filtering system with exhaust noise being minimized without sacrificing suction performance.
Airflow modes are low, medium, and high and are selected to suit the worksite environment. When the pre-filter is 80% clogged an indicator flashes to advise changing. After the 10th pre-filter has been consumed the main HEPA filter is to be changed, a red light will indicate this requirement.
In our testing, the Hakko FA-430 effectively removed fumes from soldering and welding operations without causing excessive noise or vibration. The adjustable airflow allowed us to customize the suction power for different tasks [1].
The three-stage filtration system captured a wide range of particles, including lead fumes from solder. We found the filters easy to remove and replace as needed.
Overall, we were impressed with the performance of the Hakko FA-430 fume extraction system. It provided efficient removal of fumes without compromising our work area.
Pros:
- Quiet operation;
- 3-stage filter system for superior air purification;
- Powerful suction for maximizing aerosol capture
- Dual duct ports for multiple operators;
- Adjustable ducts for mobility and control;
- Different nozzle shapes for varying use;
- HEPA filters are available to increase efficiency;
- Filter indicator lights alerting there is a clog;
- Clean air pump for a healthier workspace;
- Recommended for quiet laboratory and office;
Cons:
- The lid doesn’t fit perfectly;
- The fan is small and noisy;
- The price is painful;
- Filters need to be replaced often;
- Not suitable for heavy industrial use;
Its adjustable suction power and efficient filtration system make it a valuable addition to any workbench. The only drawbacks are its smaller fan and the necessary upkeep of filters, but these are minor compared to the clean air benefits provided by this unit.
Main Features
Wattage
The Hakko FA-430 fume extraction system is a great option for those looking for an efficient and effective way to remove harmful fumes from their workspace. The 110-watt motor provides ample power for the airflow of 120/150 CFM, effectively removing fumes from the area. The carbon filter has a lifespan of 2000 hours, making it long-lasting and cost-effective.
Additionally, the noise level on this unit is less than 68 dB, ensuring a quiet work environment. The multiple arm options allow for easy attachment to various tools, ensuring maximum coverage and effectiveness.
Ease of Use
Not only is the Hakko FA-430 efficient and powerful, but it is also user-friendly. The compact design allows for easy storage when not in use. In addition, the filter can easily be changed with just the flip of a switch, making maintenance a breeze. The clear viewing window on the front of the unit allows for a quick inspection of the filter to ensure it is working properly.
Temperature Control
One unique feature of the Hakko FA-430 is its temperature control function. This system allows for the extraction of hot fumes, making it suitable for a range of tasks and materials. The temperature can be easily adjusted with the touch of a button, ensuring maximum effectiveness and safety during use [2].
User-Friendly Controls
The user-friendly controls on the Hakko FA-430 make it easy to operate. The digital display allows for easy adjustment of settings and the timer function can be set for automatic shut off after a certain amount of time. This not only ensures maximum efficiency but also adds an extra level of safety to protect against overheating.
The Hakko FA-430 fume extraction system is a great option for those looking for an efficient and effective way to remove harmful fumes from their workspace. With its powerful motor, temperature control function, and user-friendly design, this unit is a top choice among professionals in various industries.
Durability
In addition to its features and user-friendly design, the Hakko FA-430 is also known for its durability. Customers have reported using this unit for years without any issues, making it a worthwhile investment. Plus, with its 2-year warranty, users can feel confident in their purchase.
The Hakko FA-430 fume extraction system is a top choice for those looking for an efficient and reliable option to remove harmful fumes from their workspace. With its powerful motor, temperature control function, user-friendly design, and durability, this unit is a great investment for professionals in various industries.
FAQ
Does the Hakko FA-430 unit come with accessories like the hose and head vent?
No, you do not need to purchase it separately.
Is this adequate for use with a Hakko Solder Pot indoors?
Whether you are extracting fumes from soldering or the fumes from a solder pot, this unit will work very well.
Will Hakko FA-430 work for dust as well as fumes?
It is designed for smoke removal. It does not produce enough suction to be connected to a woodworking tool for dust collection. However, it will remove anything floating in the air near the intake. Just get some extra pre-filters if your air is really dirty with larger particles.
Can I solder with no ventilation if I have a Hakko FA-430?
That’s exactly why this was created. This has filters to clear out the impurities, however, it would still be a good idea to have some open windows or another source of ventilation. It’s always better to have more than enough airflow when dealing with fumes and smoke.
Can I pipe two or three soldering stations into one Hakko FA-430 unit without compromising its ability to remove fumes?
It supports up to 2 pipes. It’s possible to connect multiple soldering stations but it could potentially decrease the effectiveness of the fume extraction. We recommend using one unit per station for optimal results.
It comes with filters to clean out impurities and can easily be connected to soldering stations or other tools. However, accessories like hoses and head vents need to be purchased separately and they may not work as well when connecting multiple stations at once. Remember to always have proper ventilation in addition to this unit for optimum safety.
Will Hakko FA-430 work for filtering 3D printer enclosures?
Although we are unfamiliar with the 3D printing process or the type of fumes released, we can say that the Hakko FA430-16 Fume Extractor is specifically designed to extract solder fumes that are created during the electronic soldering and manufacturing process. The FA430-16 is not recommended for processes that involve the use of highly corrosive substances.
What is the supply voltage of Hakko FA-430?
It’s 110V if you’re in a 220V country you need to buy a 220-110V converter. Overall, the Hakko FA-430 is a reliable fume extraction system that will effectively remove solder fumes during electronic manufacturing. It does not come with accessories like hoses and head vents, but they can be purchased separately. It is not recommended for use with highly corrosive substances. The supply voltage is 110V. Always remember to have proper ventilation in addition to using this unit for safety reasons.
Does Hakko FA-430 work to extract wax fumes?
This kit came with the filter. It doesn’t purify the air but the suction pulls impurities and captures them into the filter. The unit is very localized though. Whatever you are working on you would need to position the tube near your work piece for it to draw the wax in [3].
How effective are solder fume extractors?
When it comes to solder fume extractors, the effectiveness really depends on the system you choose. The Hakko FA-430 is one of the top choices in the industry, with its high airflow rate and efficient filtering capabilities.
In our own experience using the Hakko FA-430, we have found it to be extremely effective at eliminating harmful soldering fumes from our workspace. It has a robust design that allows for easy movement around our workstation, and the filter can easily be changed when necessary.
Overall, we highly recommend the Hakko FA-430 for anyone looking for a reliable and effective solder fume extraction system.
How do you use a solder fume extractor?
To use the Hakko FA-430, simply place it near your soldering station and turn it on. The machine will automatically draw in harmful fumes and filter them out, leaving your workspace clean and safe.
It is important to regularly change the filter to ensure the maximum effectiveness of the system. This can easily be done by opening the top of the unit and sliding out the old filter, replacing it with a new one.
Do carbon filters remove solder fumes?
Yes, the carbon filter in the Hakko FA-430 effectively removes solder fumes from the air. It is important to regularly change the filter to maintain its efficiency. In addition, it is always a good idea to properly ventilate your workspace and take regular breaks while soldering to prevent excessive exposure to fumes. Overall, using a solder fume extractor like the Hakko FA-430 in combination with proper ventilation and safety measures can greatly reduce your exposure to harmful soldering fumes.
Can I use a fan as a fume extractor?
No, a fan will not effectively remove solder fumes from the air. The Hakko FA-430 and other fume extractors use an activated carbon filter to trap and remove harmful fumes. A fan simply circulates the air, potentially spreading the fumes throughout your workspace rather than removing them. It is important to use a proper fume extraction system for your safety and the cleanliness of your workspace.
Is it bad to inhale solder fumes?
Inhaling solder fumes can be harmful to your health and potentially lead to respiratory issues. It is important to use a fume extraction system like the Hakko FA-430, as well as properly ventilate your workspace and take regular breaks while soldering to minimize exposure to these fumes. It is always better to err on the side of caution and ensure that your workspace is safe and clean.
What should you not do after soldering?
It is also a good idea to clean up any spilled solder or flux, as these can potentially be harmful if touched or inhaled. Lastly, make sure to change the filter in your fume extraction system if necessary. Following these precautions will ensure a safe and clean workspace for future use.
Using a reliable fume extraction system like the Hakko FA-430 in combination with proper ventilation and safety measures can greatly reduce exposure to harmful soldering fumes. It is important to regularly maintain and change filters to ensure maximum effectiveness. Taking these precautions will help create a safe and clean soldering environment.
Should I wear a mask while soldering?
This ultimately depends on the individual and their own comfort level, as well as the effectiveness of their fume extraction system. Some people may choose to wear a mask while soldering as an extra precaution against inhaling fumes. However, it is important to properly ventilate your workspace and use a reliable fume extractor like the Hakko FA-430 in order to minimize exposure to harmful fumes. It is always better to err on the side of caution and ensure that your workspace is safe and clean.
Can you solder indoors?
It is possible to solder indoors as long as proper ventilation and safety measures are taken. This includes using a fume extraction system like the Hakko FA-430, regularly changing its filters, and properly ventilating the workspace. It is important to take these precautions in order to minimize exposure to harmful soldering fumes and ensure a safe and clean environment. However, it may be preferable to solder outdoors or in a well-ventilated area if possible.
How do you filter solder fumes?
Solder fumes can be filtered through the use of a fume extraction system, such as the Hakko FA-430, which uses an activated carbon filter to trap and remove harmful fumes from the air. It is important to regularly change the filter in order to maintain its effectiveness. In addition, proper ventilation and regular breaks while soldering can also help minimize exposure to these fumes.
How do you extract fumes?
Fumes can be extracted through the use of a fume extraction system, such as the Hakko FA-430, which uses an activated carbon filter to trap and remove harmful fumes from the air. It is important to regularly change the filter in order to maintain its effectiveness. In addition, proper ventilation and regular breaks while soldering can also help minimize exposure to these fumes.
Useful Video: Hakko Fume Extractor (FA430)
References
- https://www.hakko.com/english/products/hakko_fa430_feature.html
- https://www.synergyelectronics.co.nz/store/hakko-fa430-fume-extractor
- https://hakkousa.com/fa-430-smoke-and-fume-extraction-system-w-o-duct-kit.html