If you’ve been struggling to get your Odroid XU4 up and running, you’re not alone. Many people have reported this issue, and it can be quite frustrating. But don’t worry – we’re here to help. In this article, we will walk you through the steps to take if your Odroid XU4 is not booting properly. We will also provide a review of the product, as well as answer some common questions about the Odroid XU4.
Odroid XU4 in General
It’s designed to be used as an embedded development platform or as the base for a home media center or gaming rig.
The Odroid XU4 runs on Linux operating systems such as Ubuntu and Android. Despite being relatively powerful for its size, it suffers from one major issue: it sometimes won’t boot at all! This problem can be frustrating, but there are some steps you can take to get your Odroid up and running again. [1], [2]
What Should You Do if Your Odroid XU4 Isn’t Booting
One of the unfortunate issues with the Odroid XU4 is that it sometimes doesn’t boot. However sometimes the issue isn’t as hard to solve as it first appears. In this section, we’ll discuss some tips and tricks to get your Odroid XU4 up and running again.
Use a quality power supply
The first and most important step to take when dealing with a non-booting Odroid XU4 is to make sure you’re using a quality power supply. The Odroid XU4 requires at least 5V/2A of power, so it’s important to use the correct power adapter that can provide this amount of current.
Using an incorrect or low-quality power adapter could cause damage to the Odroid XU4, which in turn could result in it not booting up. If you don’t have access to a good quality power adapter, then it may be best to purchase one from Hardkernel before continuing with more advanced troubleshooting steps.
Also, make sure your supply is securely plugged in, and that it is providing enough power for your device. If the issue persists, try a different power cable or power adapter.
Wait for SD card to boot
Sometimes you shouldn’t rush to conclusions. The Odroid XU4 can take some time to boot from an SD card, so it’s important to be patient and wait for the device to start up. This could take anywhere from a few seconds to several minutes, depending on the size of your SD card and how many applications and services you’ve installed on it.
If you’re still having trouble after waiting for a while, then try removing the SD card and reinserting it. This should give the Odroid XU4 another chance to recognize the card and boot from it successfully.
Try using a different SD card
Sometimes the issue can be caused by a corrupted or incompatible SD card, so using another one may help resolve the issue. Make sure that the SD card is securely inserted into its slot on the board, and that all connections are secure.
You should also make sure that your SD card is properly formatted and has the correct file system installed on it (such as ext2 or ext4). If it doesn’t have either of these file systems installed, then use a tool such as GParted to format and install them onto your SD card before trying to boot again.
Burn the latest xu4 image directly to the eMMC
If none of the above steps have worked, then you may need to burn the latest xu4 image directly to the eMMC (on-board flash storage). To do this, you’ll need a Linux machine, an SD card and a USB cable.
First, download the latest version of the Odroid XU4 image from Hardkernel’s website and write it to your SD card using dd or Etcher. Once that’s done, insert the card into your Odroid XU4 and connect it to your computer with a USB cable.
Next, use dd again to write the image directly to your Odroid’s eMMC. Once that’s finished, you should be able to boot from the new image. Keep in mind that this process can take several minutes, so don’t interrupt it until it’s finished.
Check whether your board is damaged
Unfortunately, in some cases the board may be damaged due to a power surge or other issue. If none of the steps above have worked, then it’s best to check if your Odroid XU4 is still functioning correctly.
To do this, you can use a multimeter to measure the voltages on each of the pins on the board. This will help you determine whether any of them are receiving an abnormally low or high voltage. If they are, then you may need to replace your Odroid XU4 board.
However, sometimes a quick visual inspection might do the trick. Check whether any of the components on the board have been damaged or dislodged due to a power surge. If they have, then you may need to replace them before attempting to boot your Odroid XU4 again. [2], [3], [4]
FAQ
Does ODROID have WiFi?
Unfortunately, the Odroid XU4 does not come with built-in WiFi. However, it is possible to add a USB WiFi dongle, or you can use an Ethernet connection it offers.
How do I start Odroid XU4?
The Odroid XU4 is an excellent single board computer that can power a variety of projects. To avoid any issues you should know the basics of how to start the Odroid XU4.
First, you will need to have the necessary components for powering the board: a 5V / 4A power supply and an USB-C cable. Before getting started, make sure your OS image is properly flashed on the device.
Then, take your boot media and insert it into the board’s microSD slot. Depending on what operating system you are using, this can be a pre-made image file or an installation disc. Next, plug-in the Ethernet cable and power up your Odroid XU4.
After you inserted a power supply you should wait for the image to boot up and then you can access the Odroid XU4’s user interface.
Is the Odroid XU4 good?
The Odroid XU4 is a powerful single-board computer that’s capable of running a wide range of operating systems, including Ubuntu, Android, and various types of Linux distros. It has an octa-core processor with 2GB RAM, 32GB eMMC storage, Gigabit Ethernet port, two USB 3.0 ports, one USB 2.0 port, and multiple HDMI outputs. This makes it suitable for many computing tasks such as media streaming and gaming.
And with an impressive transfer speed and low power consumption, the Odroid XU4 is an excellent choice for a wide variety of projects.
Useful Video: ODROID-XU4 Octa-Core SBC
Conclusion
Odroid XU4 is a great device that can be used in many different ways. Unfortunately, like any other device, it is prone to technical issues. In this case, the Odroid XU4 not booting problem can be solved by a few simple steps: checking the power cord and adapter, trying a different SD card or attempting to reflash the OS.
One of the things you shouldn’t ignore is – using a quality power supply. In many cases, a low-quality power supply can cause problems. Replacing it with a better one will not only solve the issue but also give your device a longer life.
If you still find yourself having trouble getting your Odroid XU4 to boot properly, don’t hesitate to reach out for more help. Quality customer support can be invaluable when dealing with technical issues and there are many knowledgeable people out there who can help walk you through the process of resolving a not-booting issue on an Odroid XU4. However, in most cases the issue can be solved relatively quickly by following the steps outlined in this guide. With any luck, your Odroid XU4 will now boot normally and you can continue to enjoy its many features!
Thank you for taking the time to read this comprehensive guide on why your Odroid XU4 is not booting and how to fix it. We hope that you’ve found everything you were looking for and are able to resolve the issue quickly and easily. If you have any other questions or need more help, please don’t hesitate to contact us – we’re here to help! Good luck!
References
- https://www.hardkernel.com/shop/odroid-xu4-special-price/
- https://magazine.odroid.com/wp-content/uploads/odroid-xu4-user-manual.pdf
- https://forum.odroid.com/viewtopic.php?t=30850
- https://forum.odroid.com/viewtopic.php?t=31729