Fanimation Slinger V2 Remote Not Working: How to Fix?

If your Fanimation Slinger V2 remote isn’t working, don’t worry! This article is here to help. We’ve highlighted some of the most common issues and their solutions that you can try before contacting customer service for assistance. Read on to find out more about how to fix a Fanimation Slinger V2 remote that won’t work.

What is Fanimation Remote?

It has an LCD display which displays the speed of the fan and its other settings. The remote also features a light dimmer switch, allowing you to adjust the brightness of your lights with ease. [1]

How to Troubleshoot a Fanimation Slinger V2 Remote?

Remote is Out of Range

If your Fanimation Slinger V2 remote is out of range, the following steps may help you resolve the issue:

1. Ensure that the fan and remote are no more than 30 feet away from each other.
2. Check if there are any obstacles such as walls between the fan and remote that could create interference or blockage.
3. Make sure that the remote is pointing directly at the fan. [2]

Discharged Batteries

If your Fanimation Slinger V2 remote is not working due to discharged batteries, the following steps may help you resolve the issue:

1. Replace the batteries in the remote with fresh ones.
2. Make sure that they are inserted correctly and securely in place.
3. If this does not work, try replacing them again or use a different brand of battery. [2]

Resetting the Fanimation Slinger V2 Remote

If all else fails, you can try resetting the Fanimation Slinger V2 remote:

1. Press and hold the “Power” button on the remote for at least five seconds until the fan begins to turn off.
2. Release the “Power” button and press it again to turn the fan back on.
3. Test the fan’s response to the remote and make sure it is working properly.

If you are still having trouble getting your Fanimation Slinger V2 Remote to work, contact a professional for help or consult the user manual for additional troubleshooting tips. [2]

Resyncing the Fanimation Slinger V2 Remote

If the Fanimation Slinger V2 remote has been synced to another fan, it may need to be re-synced in order for it to work properly. Follow these steps to re-sync your Fanimation Slinger V2 Remote:

1. Unplug the power cord from the wall outlet or switch off the power at the circuit breaker.
2. Wait for at least 15 seconds and then plug the power cord back in or switch on the power at the circuit breaker.
3. Within 5 minutes, press and hold the “Power” button of your Fanimation Slinger V2 remote until the fan begins to turn off.
4. Release the “Power” button and press it again to turn the fan back on.
5. Test the fan’s response to the remote and make sure it is working properly. [2]

Synchronizing the Fanimation Slinger V2 Remote Control

If the Fanimation Slinger V2 remote control has become unsynchronized or out of sync with the fan, it may need to be re-synced in order for it to work properly. Follow these steps to synchronize your Fanimation Slinger V2 Remote:

1. With the power on and the fan running, press and hold the “Light” button on the remote for at least 5 seconds.
2. Release the “Light” button and press it again to turn off the fan light.
3. Press and hold the “Power” button until the fan begins to turn off.
4. Release the “Power” button and press it again to turn the fan back on.
5. Test the fan’s response to the remote and make sure it is working properly. [2]

Why is Fanimation Remote Not Working?

Interference

One possible cause of why your Fanimation remote is not working is interference from other wireless devices such as Wi-Fi routers, cell phones, and other electronic devices. The signals sent by these wireless devices can interfere with the signal sent by the remote, causing it to stop functioning properly. [1]

Faulty Receiver

Another possible cause of why your Fanimation remote is not working is due to a faulty receiver. The receiver in the fan can become damaged or malfunctioning due to age, wear and tear, or being exposed to elements such as dust and moisture. In order to fix this issue you will need to replace the receiver with a new one. [1]

Programming Errors

It is also possible that the remote has been programmed incorrectly. This can happen if you have changed batteries in your remote or if you are using an older remote with a new fan. To fix this issue, you will need to reprogram the remote according to the instructions in the user manual. [1]

Obstructions

It is also possible that there are obstructions between the remote and the fan that may be preventing the signal from reaching its destination. This could be furniture, walls, or other objects blocking the signal. To fix this issue you will need to move any obstructions out of the way so that the remote can send its signal without interference. [1]

Depleted Batteries

If your remote is still not working after troubleshooting the above issues, it may be due to depleted batteries. Replacing the batteries in your remote should allow it to send signals successfully and get your fan running again.

These are some of the most common causes of why a Fanimation remote might not be working. If you have tried all of the above steps and your remote still isn’t functioning properly you may need to contact Fanimation for assistance. With some troubleshooting and patience you should be able to get your fan up and running again! [1]

How To Reset Ceiling Fan Remote

Change Your Fans Frequency Settings

If your fan is not responding to the remote, you may need to change the frequency settings. To do this:

1. Turn off power at breaker box or wall switch
2. Look for a dip switch located inside the receiver of your fan (usually behind the light kit).
3. Set all dip switches to OFF position and turn on power.
4. Press the fan button and “On” button on the remote at same time for two seconds until you hear a beep.
5. Set all dip switches to ON position and turn off power to save settings.
6. Check if your remote control is working now with the new frequency settings. [2]

Reset Ceiling Fan Remote

If you are still having trouble with your Fanimation Slinger V2 Remote not working, then it might be time to reset the device. To do this:

1. Find a small pin or paperclip and press the reset button located on the side of the remote control unit.
2. Hold down for about 5-10 seconds until you hear a beep.
3. Release and press the “On” button on the remote again to turn your ceiling fan on/off.
4. Check if your remote control is working now with the new settings. [2]

Pair the Ceiling Fan with Remote

If your Fanimation Slinger V2 remote still isn’t working, then it might be time to pair the fan and remote together. To do this:

1. Turn off power at breaker box or wall switch.
2. Hold down the “On/Off” button on the fan for 10 seconds until you hear a beep.
3. Press the “On/Off” button on the remote until you hear a beep and release both buttons at same time.
4. Check if your remote control is working now with the new settings. [2]

FAQ

How do I reconnect my fanimation remote?

If your fanimation remote is not connecting, it may be because the receiver installed in the fan has become disconnected. To reconnect:

1. Turn off the power switch located on the side of your fan motor.
2. Remove both screws that secure the receiver to the mounting plate on your fans canopy.
3. Remove the receiver and re-mount it to the mounting plate.
4. Turn on the power switch and test out your remote. If the remote is still not working, try replacing the batteries in both your remote control and receiver.

How do I fix my fan remote?

If your fan remote is not functioning properly, you may need to reset it. To do this:

1. Locate the RESET button located on the back of your remote control.
2. Press and hold the RESET button for seven seconds until the indicator light starts blinking rapidly.
3. Once the light starts blinking, release and press the RESET button once more.
4. Test out your remote control and if it’s still not working, try replacing the batteries in both your remote control and receiver.

Can a ceiling fan remote go bad?

Yes, a ceiling fan remote can go bad. Common reasons for this include low battery life, incorrect wiring and faulty connections. If your remote is not working properly, check the batteries first and then try resetting it (as described above).

Why is my remote not working even with new batteries?

If you’ve replaced the batteries in your remote control and it’s still not working, it could be due to a faulty connection. Try resetting your remote and if that doesn’t work, try removing the receiver from the fan motor and re-installing it. If this still doesn’t work, you may need to have an electrician take a look at the wiring.

Is it bad to leave a ceiling fan on all day?

No, it’s not bad to leave a ceiling fan on all day as long as it is installed correctly and the blades are in good condition. Ceiling fans help reduce energy bills by circulating air in your home and keeping temperatures even, so leaving them on can actually save you money in the long run. Just be sure to turn off the power switch when you’re not using the fan to avoid any potential hazards.

Is it safe to sleep with a ceiling fan on all night?

Yes, it is safe to sleep with a ceiling fan on all night. Ceiling fans help circulate air in your home and keep temperatures even so they can actually improve the quality of your sleep. Just be sure to turn off the power switch when you’re not using the fan to avoid any potential hazards.

Can you run a ceiling fan 24 hours a day?

Yes, you can run a ceiling fan 24 hours a day. However, it is best to turn off the power switch when you’re not using the fan to avoid any potential hazards. Additionally, running your fan 24 hours a day may cause wear and tear on the motor and increase your electric bill.

Can a ceiling fan run for 24 hours?

Yes, a ceiling fan can run for 24 hours. However, it is best to turn off the power switch when you’re not using the fan to avoid any potential hazards. Additionally, running your fan 24 hours a day may cause wear and tear on the motor and increase your electric bill.

Useful Video: Fanimation Slinger Ceiling Fan Remote Repair DIY

Conclusion

We understand how frustrating it can be when your Fanimation Slinger V2 remote stops working unexpectedly. Luckily, most of the time it’s a minor issue that you can fix yourself without too much trouble. We hope this article has been helpful in giving you some ideas on ways to resolve this common problem.

If none of our suggestions have worked for you, it may be time to call in a professional. With their expertise and specialized equipment, they should be able to diagnose and repair the issue quickly and efficiently.
No matter what route you decide to take, we hope this article has provided some insight into how to troubleshoot issues with your Fanimation Slinger V2 remote. Good luck!

Thanks for reading!

If you have any additional questions or comments, please leave them in the comment section below and we’ll answer them as soon as possible.

References

1. https://wiringsolver.com/fanimation-slinger-v2-remote-not-working/
2. https://www.fresherslive.com/latest/articles/fanimation-remote-not-working-how-to-fix-fanimation-remote-not-working-1555140505
3. https://kcscfm.com/reset-ceiling-fan-remote/